learn-how-to-add-crystal-in-your-lashes

INSTRUCTIONS FOR APPLYING LASH CRYSTALS

Products Required:

  • Swarovski® Elements Lash Crystals
  • Long-Tipped Applicators
  • FlexFusion® Adhesive with Rapid Cure Technology™ - Black
  • Mini Fan
  • Curved Tweezer
  • Straight Tweezer
  • Lash Palette

Preparation:

  • Plan your crystal design and apply a full set of lashes from 75-100+ per eye.
  • For best results, apply Lash Crystals to a full application of eyelash extensions
    • Fuller eyelash extension applications provide better support for the Lash Crystals and help disguise the base of the Lash Crystal so that it will not be noticed by the client when she opens her eyes.

Crystal Pickup:

  1. Lash Crystals and, using a clean set of straight tweezers, select the desired quantity of crystals and place them on your Lash Palette.
  2. Ensure that each crystal is facing up with the flat side lying on the Lash Palette.
  3. Ensure that each crystal is facing up with the flat side lying on the Lash Palette.

Instructions:

Step 1 - Apply a new drop of adhesive in the adhesive tray.

Step 2 - Prepare your Long-Tipped Applicator by cutting off the microfiber tip, leaving only the plastic tip.

Step 3 - Remove the necessary quantity of Lash Crystals from the canister and place them on the Lash Palette. Adjust crystals so they are facing up with the flat side lying on the Lash Palette.

Step 4 - Isolate the desired extended lashes according to your design.

Step 5 - Once isolated, use the Long-Tipped Applicator and touch the plastic tip into the adhesive, creating a single bead of adhesive on the end. Coat the small section of the extended lash where the crystal will be applied.

Step 6 - While holding the isolation, pick up a Lash Crystal from the Lash Palette.

Step 7 - Still holding the isolation, position the crystal where the adhesive has been coated on the extended lash. Hold the crystal in place for 5-10 seconds.

Step 8 - Still holding the isolation, slowly release the crystal onto the extended lash.

Step 9 - Still holding the isolation, fan the lash for 5-10 seconds with your Mini Fan to help set the bond of the crystal.

Step 10 - Release the isolation.