Zoom Eyelash Applicator

Eyelash Applicator


Instructions for the Rimini Applicator

Step 1: Slowly remove the lashes from its eyelash tray and place each lash into the grooves on the lash stand.

Step 2: Carefully position the Rimini Eyelash Applicator above the lashes and press both ends to open the soft rubber grips apart from each other...

Step 3: Now make sure that the eyelash is proportionately positioned from the right and left evenly, and is within the centre, of the Rimini Eyelash Applicator. (Ideally you want to do this only once, to prevent from having to replace the lashes into the grooves, if you've made a mistake - don't worry, practice makes perfect)

Step 4: Release from pressing the applicator. Your Rimini Eyelash Applicator should now have a firm grip on the eyelash.

Step 5: Confirm that the eyelash is properly secured in the applicator, and in the centre, or, positioned, as needed.

Step 6: Next, apply your glue, as you normally would; i.e. apply a thin amount of glue along the base of the lash strip, as illustrated in the image.

Step 7: Allow the glue to become tacky, and then place the eyelashes as close to the baseline/lash line of your natural lashes, working from the centre out. Hold the eyelash in place for a few seconds until the lash strip has a chance to hold/stick. Release the Rimini Eyelash Applicator, and there you have it, you're all done!.

Note: Reusable strip lashes can be re-placed on the lash stand for reshaping and continuous wear.

Eyelash Applicator